Top 10 Best Grease For U Joints With Expert Recommendation

Last Update:

In need of the Best Grease For U Joints? You can trust our selection for the Best Grease For U Joints, Because We have worked hard studying and analyzing 39631 reviews for Grease For U Joints and rating them. It was a difficult job to list only ten products for Grease For U Joints where thousands of them are available online. I hope it will help you to make a final decision for Grease For U Joints Reviews.

Best Grease For U Joints
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Best Grease For U Joints

Our team scanned 39631 reviews before putting any suggestions for the Grease For U Joints in this article.

NoProductScoreAction
1MOOG 338 U-joint9.8Buy It On Amazon.com
2MOOG 295 U-joint9.8Buy It On Amazon.com
3MOOG 374 U-joint9.6Buy It On Amazon.com
4MOOG 232 U-joint9.4Buy It On Amazon.com
5MOOG 464 U-joint9Buy It On Amazon.com
6Pure Polaris U-Joint Grease 3 oz8.8Buy It On Amazon.com
7GREASE-U-JOINT, PREMIUM MOLY8.4Buy It On Amazon.com
8MOOG 369 U-joint8.4Buy It On Amazon.com
9Spicer 5-153X U-Joint Kit8.4Buy It On Amazon.com
10MOOG 354 U-joint8.4Buy It On Amazon.com

Table Of Content:

1. MOOG 338 U-joint

  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles.
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability.
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution.
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear.

2. MOOG 295 U-joint

  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower.
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability.
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces.

3. MOOG 374 U-joint

  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles.
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability.
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution.
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear.

4. MOOG 232 U-joint

  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower.
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability.
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces.

5. MOOG 464 U-joint

  • built to last – rugged design specifically engineered for fleets, off-highway and commercial vehicles.
  • strong and durable – bearing cups are cold-formed, case-hardened and precision ground for strength and durability.
  • keeps dirt out – abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
  • greaseable design – drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution.
  • inhibits premature wear – cross trunnions ground to a 15-25 rms finish for a smooth surface free of microscopic grooves that can cause premature wear.
  • reliable performance – internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup.
  • rigorous testing – comprehensive testing throughout design and development processes by moog engineers for quality you can count on.

6. Pure Polaris U-Joint Grease 3 oz

  • 3 oz tube
  • High molybdenum grease engineered for the extreme pressure, high shock applications of Polaris Atv shaft drives.

7. GREASE-U-JOINT, PREMIUM MOLY

  • Add every 50 hours, 3 months or 500 miles
  • Extremely water resistant
  • Molybdenum additive cushions shock-load in U-joint applications
  • High shear stability
  • Superior adhesion

8. MOOG 369 U-joint

  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles.
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability.
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution.
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear.

9. Spicer 5-153X U-Joint Kit

  • Spicer 10-Series greaseable universal joint with snap rings
  • Outside Snap Ring Style (OSR)
  • 1310 Series
  • Bearing Cap Diameter: 1.062 inches
  • Length Between Snap Rings: 3.219 inches

10. MOOG 354 U-joint

  • STRONG AND DURABLE — Premium u-joints are cold-forged, case-hardened and precision-ground
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants.
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

Grease For U Joints Buying Guide


Does the thought of finding a great Grease For U Joints stress you out? Has your mind been juggling between choices when it comes to buying Grease For U Joints in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Grease For U Joints for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Grease For U Joints Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Grease For U Joints in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Grease For U Joints currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Grease For U Joints brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Grease For U Joints based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Grease For U Joints before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Grease For U Joints they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Grease For U Joints, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Grease For U Joints before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Grease For U Joints will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Grease For U Joints if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Grease For U Joints on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Grease For U Joints on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Grease For U Joints featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment

Your email address will not be published. Required fields are marked *